Right-click on | Trust Computer Products 802.11g guide

IEEE 802.11g PCI Card Wireless Network Adapter

•Click on Network adapters.

•Right-click on the

Conceptronic IEEE 802.11g PCI Card Wireless Network Adapter - CB31.

•Select Properties to check that the drivers are installed properly.

•Look under Device Status to check that the device is working properly.

•Click OK.

29

Image 29

Trust Computer Products 802.11g manual Right-click on

Contents

108Mbps Super G Wireless PCI Adapter Contents Package Contents Introduction 108Mbps SuperG Wireless PCI Adapter Leds Standards Based Technology Wireless Basics Installation Considerations Getting Started Home Internet Network with Multiple IP Addresses To complete this installation, please follow these steps Set the Static IP Address of the wireless cards Install your Internet Sharing Software Check the Wireless Configuration for each wireless cardInstall the 108Mbps SuperG Wireless PCI Adapter Installation Installing the 108Mbps SuperG Wireless PCI Adapter 108Mbps SuperG Wireless PCI Adapter Ieee 802.11g PCI Card Wireless Network Adapter Installing The Configuration Utility Ieee 802.11g PCI Card Wireless Network Adapter Uninstalling the Configuration Utility Click on Device Manager Uninstalling the Driver 108Mbps SuperG Wireless PCI Adapter Ieee 802.11g PCI Card Wireless Network Adapter Configuration Tab Using the Configuration Utility for Windows Data Encryption Authentication Signal Strength Authentication StateStatus Tab Network Type Advanced State shows the Radio Status on or OFF Disable Radio Enable IP setting and Proxy setting in profileRemember mini status position Auto hide mini status Transmit Power Power save ModeStart ad hoc network Ad-Hoc Channel Click Device Manager Click Properties Right-click on 108Mbps SuperG Wireless PCI Adapter Ieee 802.11g PCI Card Wireless Network Adapter Diagnostic LED Media Access ControlStandards Buy Type Physical Dimensions WeightTransmitter Output Power Humidity