108Mbps SuperG Wireless PCI Adapter
Installation
This section shows you how to install the Utility if you are using the operating systems Windows 2000, ME, 98SE. Follow the instructions given below on how to install the hardware (The 108Mbps SuperG Wireless PCI Adapter) and then the software (driver and utility). For those using Windows XP, the installation procedure will be the same until the utility installation. Windows XP has a built in utility for wireless devices. The configuration utility does not need to be installed for users using the XP operating system.
System Requirements:
•A laptop computer with an available PCI -
•At least a 300 MHz processor and 32 MB of memory
•PCI bus Controller properly installed and working
•An 802.11b/g Access Point (for Infrastructure Mode) or another 802.11b/g wireless card (for
12
