
1 . I N S T A L L A T I O N : :
Push the T.I.E. interface module carefully into place at the top of the handlebar support tube. The loose screws hanging from the metal fastening plate on the bottom of the T.I.E. module must enter the holes at the top end of the handlebar. Make sure that the module is correctly in place and tighten the fastening screws.
1.1 Turning the user interface on and off
The user interface turns itself on when the device is connected to the mains current. When the user interface has not been used for five minutes (no
::Protect Alpha 200 from excess sunlight, because that may fade the interface box and surface membrane colours. Please also be careful not to allow Alpha 200 to come into contact with water. A sharp blow may damage the interface.
::You can set your language in the Extra function.
4 ::