Tunturi ALPHA 200 HEART-RATE and Pulse Measurement, Measurement with a heart-rate belt

3. HEART-RATE AND PULSE MEASUREMENT ::

3.1Measurement with a heart-rate belt

1.Attach the transmitter to the elastic strap.

2.Adjust the length of the strap to fit snugly and comfortably.

4.Check the wet electrodes are uniformly positioned next to your skin and that the Polar logo is central and upright.

3.Pull the transmitter away from your chest and wet the grooved areas at its back.

The heart-rate belt works best when the transmitter is worn against your bare skin. If you prefer to wear it over a shirt, please moisten the shirt well under the electrodes: the contacts must be wet while you exercise.

Take good care of the transmitter after you exercise. This helps to prolong the life of the electrodes and battery.

1.Wash the transmitter carefully with a mild soap-water solution.

2.Rinse with clean water.

3.Dry the transmitter carefully.

:: 7