Tunturi C60 owner manual Trainer

T-TRAINER

As you select the T-TRAINER program, you can exercise under control through six different training modules at intervals. After every two minutes of training, there is a one-minute recovery time. The display show the training model, time, speed and muscle groups on which the training influences most efficiently.

1.Select T-TRAINER. Confirm the selection by pressing the selection dial. The display shows one of the six training modules. After the module has been introduced, the display shows the pulse and resistance. Start the training by following the instructions on the display. Each of the performance modules takes two minutes.

2.The program shifts automatically to a one-minute recovery period. At the end of the recovery period, the program automatically starts the next training module.

3.By pressing the selection dial you can move to

the next stage, either to the training module or to the recovery time.

4.To stop the T-TRAINER exercise and to return to the start menu, press the BACK/STOP key.

T-RIDE

T-RIDE TRAINING simulates riding a bike on a natural terrain. During training, you can change gears using the selection dial and watch the altitude profile.

1.Select T-RIDE.

2.Select the terrain and confirm your selection.

3.Set the starting point for the session using the selection dial.

4.Set the ending point for the session using the selection dial.

5.Start your training session by pedalling. You can change gears (1–8) using the selection dial. During training, you can display altitude profile or heart rate using the selection dial. The heart rate display requires heart rate measurement.

6.Once you have completed the route, the meter beeps and the training session ends.

7.To stop the training session, press the BACK/STOP button. You can then stop the session by selecting EXIT, save the session to the memory by selecting SAVE AND EXIT or continue your training session by selecting CONTINUE.

OWN TRAINING

You can create and save up to 100 training programs on the meter.

SAVING A PROGRAM

1.End your training session by pressing BACK/STOP.

2.Select SAVE AND EXIT and confirm your selection.

3.Enter a name for the training session and confirm it using the selection dial.

IMPORTANT! You can only save programs that are longer than 10 minutes.

IMPORTANT! To save a training session you will need to select a username.

O W N E R ' S M A N U A L • C 6 0

USING SAVED PROGRAMS

1.Select OWN TRAINING.

2.Select a training session from the list.

3.Select the desired execution method:

A)Replay = repeat a previously saved exercise.

B)Edit = edit the duration of a previously saved exercise before you start.

C)Race = compete against a previously saved workout.

NOTE! You can only use programme profiles created in the Manual function. These profiles show effort as a constant torque (Nm).

4.Confirm your selection by pressing the selection dial.

A)Replay = start pedaling to begin the exercise. You can adjust the effort level with the selection dial.

B)Edit = select the duration of the exercise with the selection dial (set the time to 10-180 minutes). Start pedaling to begin the exercise. You can adjust the effort level with the selection dial.

C)Race = Using the selection dial, select the race mode (time: the distance you can pedal in a given time; or distance: how fast you can cover a given distance) and confirm your selection using the selection dial. The display shows a previously saved program. Start pedalling to begin the race. The dash line on the display shows whether you are ahead or behind the benchmark training session, which is the most recently saved training session using this program. The distance to the previously saved session is also displayed: the previously saved training session is shown with a light vertical dash line, and your race effort is shown with a dark vertical dash line.

5.To stop the training session, press the BACK/STOP button. You can then stop the session by selecting EXIT, save the session to the memory by selecting SAVE AND EXIT or continue your training session by selecting CONTINUE.

FITNESS TEST

The meter uses a multi-step fitness test. The test begins at a low level of effort, which increases steadily in accordance with the selected test type. A multi-step test is a safe and reliable, submaximal means of measuring a person’s physical fitness level. The test continues until the test subject has achieved his or her individual target heart rate (85% of maximum heart rate). The test requires the use of a heart rate belt: the meter monitors changes in the heart rate throughout the test, using the data to calculate an estimate of the tested person’s maximum oxygen uptake capacity. The maximum oxygen uptake capacity is the best measure of a person’s physical fitness level. After the test, the meter gives versatile information on your fitness level: a description and a numerical value (ml/kg/min).

PREPARING FOR THE TEST

1.Make sure that the data associated with your username is updated – the meter uses the user data as a basis for the fitness test.

2.Select FITNESS TEST.

G B

11