O W N E R ' S M A N U A L • C 6 0
Push the stand feet to the rear support ends and attach the rear support to the main frame with two bolts, washers and locking sleeves.
FRONT FRAME TUBE
Remove the rubber band from around meter cable coming from the frame tube. Attach the meter cable to the connector coming from the front frame tube. Push the front frame tube inside the frame tube: do not damage the meter cable! Attach the front frame tube tight to the frame with the washers and attachment screws.
FOOTRESTS
Attach the footrests to the position of your choice on the pedal shafts with two screws, two washers / screw and locking nuts.
ARMS
Push the metal shaft through the bracket housing of the left arm. Attach now the left arm to the front frame tube by pushing the metal shaft through the opening in the tube. Push the right arm on the shaft and lock it by tightening a large washer, a locking sleeve and a screw to the both ends of the shaft. Tighten the arms using two Allen keys.
Push the left footrest support forward so that you can push the tube in the front of the foot rest support inside the arm tube. Lock the tube with the locking screw. Repeat the procedure with the right footrest support.
4
