Tunturi J3.5F owner manual Moving and Storage, Technical Data

ERROR CODES

The user interface will display information about certain operational faults.

ERR 01: speed sensor error. Turn the power switch off and on again to reset the treadmill. If treadmill recovers to normal operation, you may continue to use the treadmill. If treadmill does not recover to normal operation, then call the dealer for service.

ERR 02: over speed error. Call your dealer for service.

ERR 03: safety key error. Secure the safety key in place and continue training.

ERR 05: Incline motor error. Turn the power switch off and on again to reset the treadmill. Press simultaneously -, + and elevation down keys for automatic self-calibration. If treadmill recovers to normal operation, you may continue to use the treadmill. If treadmill does not recover to normal operation, then call the dealer for service.

ERR 11: Communication error. Turn the power switch off and on again to reset the treadmill. If treadmill recovers to normal operation, you may continue to use the treadmill. If treadmill does not recover to normal operation, then call the dealer for service.

PROTECTIVE CIRCUIT

To protect your safety, this treadmill is designed and equipped with run away protection. If the admissible operating speed of the trainer is exceeded or fallen below, the protective circuit will shut off the treadmill to protect you and the equipment. The treadmill will flicker all display values to alert the user to the condition. Reset the treadmill by turning the power switch off for 1 minute and then on again. This will return the treadmill back to normal operating mode.

MOVING AND STORAGE

Folding and unfolding of this treadmill is made easy with the assistance of gas cylinder. After the treadmill has come to a complete stop, unplug the power cord from the wall and the treadmill.

NOTE! Ensure the deck is in 0 % elevation.

O W N E R ’ S M A N U A L • J 3 . 5 F GB

Fold up the deck; when you hear a click, the deck is locked in place. The lock release handle is on the left-hand side of the rear support. Release the running track lock by pulling the handle down. To release the folding lock, support the deck with your right hand while you release the lock with your left hand. Deck is ready to be positioned horizontally on the ground.

NOTE! Please handle with caution although it is designed with the gas cylinder taking most of the weight off the deck.

Lift up the treadmill from the rear to an angle and push it on the transportation wheels. Lower the treadmill carefully onto the floor.

NOTE! Transport the treadmill with extreme caution over uneven surfaces, for example over a step. The treadmill should never be transported upstairs using the wheels over the steps, instead it must be carried. We recommend that you use a protective base when transporting the equipment.

NOTE! The running belt needs to be realigned and centered after moving.

To prevent malfunctioning of the treadmill, store it in a dry place with as little temperature variation as possible, protected against dust. Always unplug the treadmill from the electrical outlet when not in use.

TECHNICAL DATA
Length (storage position)	......186 cm (95 cm)
Height (storage position)	.......136 cm (167 cm)
Width	74 cm
Weight	68 kg
Running surface	43 cm x 131 cm
Speed	1,0-16,0 km/h
Elevation range	0-10 %
Motor	2,0 HP (1,47KW)

J3.5F treadmill meets the requirements of the EU’s EMC Directives on electromagnetic compatibility (89/336/EEC) and electrical equipment designed for use within certain voltage limits (73/23/EEC). This product therefore carries the CE label. J3.5F treadmill meets EN precision and safety standards (Class B H, EN-957, parts 1 and 6).

9