Put the right handlebar onto the console. Make sure the foam is inside the plastics, and does not curl up. Line up the holes on the bottom of the handrail, and loosely place the bolts inside.

Attach the bottom of the handrail to the bracket, and tighten the bolt. When this is attached, you can tighten the bolts on the top of the handlebar.

Apply the brackets to the upright tube. First position all the screws loosely, and make sure the bracket touches both the bottom and the side to the frame. Then first screw tight the bolts on the bottom, and finally the bolts on the upright tube.

Remove the protective film from the display.

SAFETY KEY

The treadmill cannot be used if the key is not properly installed on the console; if the key is removed from its place, the treadmill will immediately stop. Insert the safety key into the key holder at the left side of the console. Ensure that the clip of the safety key is properly attached to your clothing; as the cord tightens, make sure the clip does not detach itself from your clothing before the safety key disconnects from the user interface.

POWER CORD AND GROUNDING INSTRUCTIONS

Plug the socket end of the power cord into the treadmill at the left front corner. Before connecting the device to a power source, make sure that local voltage matches that indicated on the type plate. Turn on the power using the switch next to the socket on the treadmill. This treadmill must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electrical shock. This product is equipped with a cord having an equipment-grounded conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not use extension cables when connecting the equipment to the power source.

DANGER! Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman, if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

BASICS ON

EXERCISING

Before training on a motor-driven treadmill, you should familiarise yourself with its functions and operation.

Working out with this equipment is excellent aerobic exercise, the principle being that the exercise should be suitably light but of long duration. Aerobic exercise is based on improving the body’s maximum oxygen uptake, which in turn improves endurance and fitness.

Aerobic exercise should above all be pleasant. You should perspire, but your heart rate should stay at a comfortable level. This will allow for a longer training session. Three 30 to 60 minute sessions a week is recommended, depending on your goals, fitness level and schedule.

If you prefer a walking exercise, you can increase the versatility and effort level of your workout by adjusting the elevation. For a more versatile walking exercise, you can also use light dumbbells to work your arm muscles. Remember to pay attention to safety concerns, such as maintaining your balance.

You’ll find information about using your exercise equipment and what makes for efficient training at Tunturi’s website at www.tunturi.com.

ABOUT THE EXERCISE ENVIRONMENT

Make sure the exercise environment has adequate ventilation. To avoid catching cold, do not exercise in a draughty place.

4

Page 4
Image 4
Tunturi T70 Basics on Exercising, Safety KEY, Power Cord and Grounding Instructions, About the Exercise Environment