www.Turtle-Beach.com

In Windows Vista… in addition to setting the Amigo Control Panel’s S/PDIF settings pull-down menu to 48 kHz, you must also set the Digital Output as your default playback device in the Vista Sound Control Panel. Click Start Æ Control Panel Æ Sound and select “Digital Output – Audio Advantage SRM Device” as the Default Playback Device.

Setting Up Amigo for use with Skypeor Other Internet Phone Software

When Amigo is connected to the USB port, it usually will set itself as the "default sound device", which means that it should work automatically with Skype's internet phone software or other similar software. If Skype does not automatically use Amigo after it has been installed, then this can be set manually within the Skype software as follows:

1.Launch the Skype software, then click on "Tools" and select "Options". The Options dialog window will open.

2.In the Options dialog window, click on "Sound Devices" (shown below).

3.In the three drop-down menus available for Sound Devices ("Audio In", "Audio Out", and "Ringing"), select "Audio Advantage Amigo Device" as the sound device you wish to use for Skype (shown below).

4. Click the 'Save' button to set the changes for Skype and close the Options window.

Note on Skype’s "Ringing" Options

If you do not have speakers connected to Amigo and are using only headphones, then it is possible that you may not hear the Skype ring when you are not wearing headphones. For this type of setting, it may be preferable to set Skype’s "Ringing" option to use your system's existing sound card, which is likely to be connected to powered speakers, so that you can easily hear the ring at any time.

Page 18