Tyan Computer B5102 Rack Mounting, Fully extend the sliding rails until they lock, Setting Up

2.2Rack Mounting

2.Screw the sliding rail mounting brackets to the sliding rails as shown, using the short black screws from the supplied nuts, screws and washers kit. Ensure that the brackets with the cut away section (to accommodate the handles on the front of the unit) are fixed to the front end of the rail.

Note: Do not tighten the brackets to the rails as you will need to adjust their position later.

3.Fully extend the sliding rails until they lock.

4.Screw each sliding rail to the side of the Transport GX21 as shown. You will need 3 short, silver colored screws from the supplied nuts, screws and washers kit, for each rail.

5. Return the sliding rails to their shortest position.

14 Chapter 2: Setting Up