Tyan Computer B5102, GX21 Resources Controlled By, Manual / Auto ESCD, PCI / VGA Palette Snoop

Please note that the BIOS will automatically reset it to the default setting of Disabled after reconfiguring the new ESCD. So, there is no need for you to manually disable this feature after rebooting. The choices are:

Enabled / Disabled

Resources Controlled By

When this option is set to AUTO, the BIOS by using ESCD, controls the IRQ and DMA assignments of all of the boot and PNP devices in the system. If you set this option to Manual, you will be able to manually assign all IRQ and DMA informa- tion.The choices are:

Manual / Auto (ESCD)

PCI / VGA Palette Snoop

This option is only useful if you use an MPEG card or an add- on card that makes use of the graphics card's Feature Con- nector. When enabled, it corrects incorrect color reproduction by "snooping" into the graphics card's framebuffer memory and modifying (synchronizing) the information delivered from the graphics card's Feature Connector to the MPEG or add- on card. It will also solve the problem of display inversion to a black screen after using the MPEG card. The choices are:

Enabled / Disabled

PCI 1 INT Assignment

This setting defines the IRQ for the 1st PCI device. The pos- sible values are:

Auto / 3 / 4 / 5 / 7 / 8 /11 / 12 /14 /15

CNR LAN INT Assignment

This setting defines the IRQ for the CNR LAN device. The possible val- ues are:

Auto / 3 / 4 / 5 / 7 / 8 /11 / 12 /14 /15

90