![](/images/new-backgrounds/1193348/19334819x1.webp)
2.4 Quick References for Jumpers
In this manual, the term “closed” and “on” are used when referring to jumpers (or jumper pins) that are active; “open” and “off” are used when referring to jumpers (or jumper pins) that are inactive. See Figure 2.0a and Figure 2.0c for examples of “on” and “off” pins and jumpers.
Jumpers and pins are connected by slipping the plastic jumper connector over the top of two adjacent jumper pins (indicated by
The tables and maps on the following pages will help you set the jumpers for CPU speed, infrared, and external connector pin assignments, among others. The miniature motherboard maps will help you locate the jumpers on your board. Full page maps of the motherboard can be found on the next two pages.
off |
| on |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Figure 2.0a
(overhead view)
off | on |
open | ||||||||
|
| 1 |
|
| 1 |
|
|
|
|
|
|
|
|
| 1 | ||
|
| 2 |
|
| 2 |
|
| 2 |
|
| 3 |
|
| 3 |
|
| 3 |
|
|
|
|
|
|
|
|
|
Figure 2.0b
(overhead view)
open |
Figure 2.0c
(front angle view)
1 | 1 |
|
|
Figure 2.0d
(front angle view)
10
http://www.tyan.com