![](/images/new-backgrounds/1193348/19334873x1.webp)
(advanced setup, continued)
| FORMAT: | [option] |
|
Mode | OPTIONS: | Normal | Selects the mode to use. |
|
|
| |
|
|
| |
| NOTES: | This option is only for Serial Port B. | |
|
|
|
|
| FORMAT: | [option] |
|
| OPTIONS: | 3F8, 2F8 | These options are depen- |
Base I/O |
| 3E8, 2E8 | dent on the IRQ, and vice |
|
| versa. | |
| NOTES: | Recommended combinations include ‘3F8, | |
|
| IRQ4’ and ‘2F8, IRQ3’. | |
|
|
|
|
| FORMAT: | [option] |
|
| OPTIONS: | IRQ4 | These IRQs are paired |
Interrupt |
| IRQ3 | with the Base I/O option. |
| NOTES: | Recommended combinations include ‘3F8, | |
|
| IRQ4’ and ‘2F8, IRQ3’. | |
|
|
|
|
| FORMAT: | [option] |
|
| OPTIONS: | Disabled | ‘Disabled’ turns off the |
|
|
| port. |
|
| Enabled | ‘Enabled’ requires you to |
Parallel Port |
|
| enter the base I/O |
|
| address and the INT num- | |
|
|
| ber. |
|
|
|
|
|
| Auto | ‘Auto’ makes the BIOS |
|
|
| configure the port during |
|
|
| POST. |
|
|
|
|
| FORMAT: | [option] |
|
| OPTIONS: | Output only | Standard |
|
|
| col for parallel devices. |
|
| ||
|
|
| allel devices. |
|
| EPP | Enhanced Parallel Port |
Mode |
|
| interface may provide |
|
|
| higher bandwidth, if an |
|
|
| EPP device is used. |
|
|
|
|
|
| ECP | Enhanced Capability Port |
|
|
| interface may provide |
|
|
| higher bandwidth, if an |
|
|
| ECP device is used. |
|
|
|
|
|
|
|
|
| FORMAT: | [option] |
|
Base I/O | OPTIONS: | 378 | These options appear |
| 278 | when the parallel port is | |
|
| 3BC | set to ‘Enabled’. |
|
|
|
|
| FORMAT: | [option] |
|
Interrupt | OPTIONS: | IRQ5 | These options appear |
| IRQ7 | when the parallel port is | |
|
|
| set to ‘Enabled’. |
Tiger MP S2460
37