Revision A
Accessing information on the device
The display enables you to view the different information on the settings of the GoodKnight 420G. (Refer to reference 1 in Figure 2, page 5).
The setting information is accessible whether the device is on standby or in operation. For this, just press the Information Access button for one second. (See reference 2 in Figure 2, page 5). With each additional key press, you access further data.
NOTE
In the following screens, the device is shown in operation mode and all the values are given as a guide only.
Press for one |
|
|
second on | 10.0 | cmH2O |
|
| |
Information | P |
|
Access button |
| |
Press |
|
|
Information | 5 | min |
Access button |
|
|
Press |
|
|
|
| |
Information | 4.0 | cmH2O |
Access button | P |
|
|
|
Press
Information 114 h Access button
Press |
|
|
|
|
Information | 42 h | |||
Access button |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Press
Information Id *.* Access button
•The pressure level set by the doctor (equivalent to the prescribed pressure when the device is running).
•The ramp time set by the doctor (period of time over which the pressure gradually increases from the starting ramp pressure to the pressure level).
•The starting ramp pressure (pressure level at the beginning of ramp); this parameter is adjustable and visible only if the ramp time is other than 0.
The symbol 
used shows that the parameter is adjustable. You can increase or reduce the value displayed by using the ON/OFF or Ramp keys. For further details, refer to the chapter “Using the ramp”. (See page 12).
•The hour meter value (device operating time).
•The compliance meter value (time during which the patient has breathed with the device).
•The GoodKnight 420G
Press the Information Access button again to exit the parameter setting menu.
14 | GoodKnight 420G - Manuel patient |