Tyco Electronics PL0349 manual Front Panel, Rear Panel, Ports

8 Port Ethernet Smart Switch With Fibre Uplink

Front Panel

The front panel of the switch has the LED indicators, the fibre uplink port and the RJ-45 Shielded/Unshielded Ethernet Ports.

Figure 1 - Switch Front Panel

Rear Panel

The rear panel of the switch contains the IEC style power inlet connector and the console management connector.

Figure 2 –Switch Rear Panel

Ports

￿RJ-45 Ports. These Ethernet RJ-45 ports support both shielded and unshielded cabling systems. Each port auto- negotiates the 10/100Mbit/s network speed and auto- detects the connected device type which eliminates the need for cross-over cables.

￿Fibre Port. The switch has a fibre uplink port that can be connected to 100Base-FX devices. Different optical connector formats are available (ST/SC/MT-RJ) together with singlemode and multimode fibres.

￿Console Port. This port enables the administrator to change switch settings such as port values, VLANs etc.

￿AC Power Connector This connector accepts any standard IEC 320 style power connector.

Tyco Electronics Page 3