8 Port Ethernet Smart Switch With Fibre Uplink
This screen enables the port speed and duplex mode to be controlled.
The default is auto- negotiation which is the best method for most new networks.
However, some legacy systems may need to use fixed duplex and speeds, so these can be applied on the switch using this menu.
Select the option 1..5 to change port settings or select 6 to return to the main menu.
Figure 6 - Port Configuration - 2
Simple port based VLANs can be created by selecting option 2 from the entry menu. There are 2 steps to create VLANs. First draw a map that shows a matrix of ports and VLANs.
Then select the port and the required VLAN ID (1..7). To add the port to the VLAN, enter option 1 and then enter option 3 to save the setting. Repeat this for all required VLAN and port combinations. Note that the switch resets each time the VLAN state is viewed. This is normal.
Figure 7 - Port VLAN Configuration
Figure 8 - VLAN Configuration
| Tyco Electronics | Page 9 |
|
