
8 Port Ethernet Smart Switch With Fibre Uplink
LED Indicators
The diagnostic LED indicators located on the front panel of the switch provide
| LED | Colour | Function |
|
|
|
|
| Power | Green | Power on |
| 10/100 | Green | The UTP port is operating at 100Mbit/s |
|
|
| |
| Off | The UTP port is operating at 10Mbit/s or | |
|
| ||
|
| no partner device is attached | |
|
|
| |
| LK/ACT | Green | Ethernet link pulses are present |
|
|
| |
| Blinks | Port transmitting or receiving packets | |
|
| ||
|
| Off | No device is attached or faulty cable |
| FDX/COL | Orange | The port is in |
| Blinks | Collisions in | |
|
| Off | The port is in |
|
|
|
|
| LK/ACT | Green | Ethernet fibre pulses are present |
| Blinks | Port transmitting or receiving packets | |
|
| ||
|
| Off | No device is attached or faulty cable |
|
| Orange | The port is in |
| FDX/COL |
|
|
| Blinks | Collisions in | |
|
| Off | The port is in half duplex mode or not |
|
| connected correctly | |
|
|
| |
|
|
|
|
| Tyco Electronics | Page 6 |
|