8 Port Ethernet Smart Switch With Fibre Uplink
This entry screen is displayed when the connection is first established with the switch. Select the
required option. Note that the options 3 and 4 are immediate and do not have any confirmation steps.
Figure 4 - Entry Screen
The port setting screen is selected by entering 1 in the entry menu.
The screen then shows the current state of all the switch ports similar to the image to the right.
To change a port setting, enter the port number (1..9) and a new screen is displayed similar to Figure 6 on the next page.
Figure 5 – Port Setting Screen - 1
| Tyco Electronics | Page 8 |
|
