User’s Manual

BUILT-IN INSTALLATION

Your U-Line product is designed for built-in installation only. When built-in, it does not require additional air space for the top, sides, or rear. However, the front grille must NOT be obstructed.

NOTE

To ease unit installation and removal, it is recommended that the cabinet rough opening dimensions be increased by at least 1/4" over the dimensions given for your unit.

Unit Dimensions

Width

Height

Depth*

23-15/16"

34-1/8"

24"

 

 

 

* For full overlay door panels, add 3/4".

Once the unit is leveled and placed into the wall or under a cabinet, it is ready to be secured to the wall or cabinet with the anti-tip system (Figure 7).

Follow the instructions included with the anti-tip kit.

!WARNING

The anti-tip kit must be installed on this unit before it is used. Never use the drawers as steps or a shelf to support more than the drawers’ content.

10