User’s Manual
OVERLAY PANEL KIT PARTS
Part Number | Description | Quantity | ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
42120 | Spacer Nylon 3/8 OD x .19 ID | 10 | ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
42121 | Screw #10 x 5/8 Round Head | 10 | ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•The total weight of both drawer panels must not weigh more than 20 lbs.
•The thickness of the drawer panel must be 3/4".
Remove existing drawer front from cabinet:
1.Open drawer. Pull door gasket (Figure 8) out of the groove (top edge of door only). Start in the mid- dle and pull outward, moving toward the edge. This may take some force.
2.Remove the two screws located on both sides of the lower handle. Remove the handle (Figure 9).
3.Slide the existing drawer panel and cardboard spacer out of the drawer frame. Discard the spacer.
Attaching the full overlay panel:
4.If required, attach optional cabinet handle hardware to the overlay panel at this time. If an optional cabinet handle is installed, make sure the mounting screw heads are counter- sunk.
HANDLE | GASKET |
SCREW
DWR_OL_001
Figure 8
DWR_OL_002
Figure 9
12