U-Line 2075 CONDENSER CLEANING

User’s Manual

5.Reconnect power to the unit.

!WARNING

•DO NOT use solvent cleaning agents or abrasives on the interior. These cleansers may damage or discolor the interior.

!WARNING

Disconnect electric power to the unit before cleaning the condenser.

To remove and replace the grille for access to the condenser fins follow this procedure:

DWR019

Figure 23

1.Remove the screws (Figure 23) at each end of the grille.

2.Remove the grille.

Contents

Page Page PLEASE RECORD YOUR MODEL’S INFORMATION PRODUCT REGISTRATION CARD NOTE Page DEFINITIONS GENERAL PRECAUTIONS SITE PREPARATION Page Page Page Page Unit Dimensions FULL OVERLAY DRAWER PANEL Table 1. Full Overlay Panel Dimensions OVERLAY PANEL KIT PARTS Page Assembling the drawer and wood panel: CUSTOM INSERT DRAWER PANEL Table 2. Custom Insert Drawer Panel Dimensions Page Page TEMPERATURE CONTROLLER DRAWERS TOP STORAGE BIN CRISPER DRAWER ORGANIZER Page LIGHT BULB REPLACEMENT EXTERIOR CLEANING — AS REQUIRED INTERIOR CLEANING — AS REQUIRED CONDENSER CLEANING - EVERY 3 MONTHS Page BEFORE CALLING FOR SERVICE TROUBLESHOOTING GUIDE Troubleshooting — What to check when problems occur