U-Line ICE-MAKER/REFRIGERATOR user manual Adjusting the Temperature Control

If ice maker is not used regularly, the ice bucket should be emptied peri- odically to ensure fresh cubes.

It is normal for cubes to appear cloudy. This is caused by air being trapped in the water due to fast freezing. It has nothing to do with the health, taste or chemical make-up of the water. It is the same air that is in every glass of water you drink.

To provide for higher ice rate (production of more cubes), adjust the temperature control to a warmer setting. If hollow cubes result, adjust temperature somewhat colder. For less cube production, adjust to a colder setting.

The ice bucket must be fully inserted in the freezer section.

The ice bin door must be fully closed.

For frost free models: Do not place any objects over air inlet or outlet in freezer section.

For frost free models: Light frosting may occur in high humidity condi- tions or if the ice bucket is not pushed in completely.

ADJUSTING THE TEMPERATURE

CONTROL

Models BI-95 and BI-98: Use a flat tip screwdriver to turn adjust- ing screw, located behind front grill, clockwise for colder (slower ice production) or counterclock- wise for warmer (faster ice pro- duction).

Series 15, 29 and 75: Adjust control setting by turning the numbered dial, recessed behind the front grill, by the ON-OFF switch (see Figure 34).

6		5	4
7	O		R	3
	LD
8	C	E
				2
9				1

UL012A

Figure 34

Model SP18 temperature control has been preset at the factory for optimum ice production. Do not attempt to make adjustments.

23