8.Leave water supply line and power cord disconnected until ready to reuse.
NOTE
The use of
TROUBLESHOOTING
BEFORE CALLING FOR SERVICE
If the unit appears to be malfunctioning, read through NORMAL OPER- ATION first. If the problem persists, check the TROUBLESHOOTING GUIDE. Locate the problem in the guide and refer to the cause and its remedy before calling for service. The problem could be something very simple which can be solved without a service call.
TROUBLESHOOTING GUIDE
!WARNING
NEVER attempt to repair or perform maintenance on the unit until the main electrical power has been disconnected.
Troubleshooting — What to check when problems occur
Problem | Possible Cause | Remedy |
No interior light | Loose or burned out | Tighten or replace bulb |
| bulb |
|
The unit is not | Light staying on | Adjust door so light switch |
cold enough |
| bracket contacts switch |
|
| plunger. See ALIGNING |
|
| THE DOOR |
| Door gasket not | Adjust door. See |
| sealing properly | ALIGNING THE DOOR |
| Dirty condenser coils | Clean condenser. See |
|
| CARE AND CLEANING |
| Airflow to front grill | Airflow must not be |
| blocked | obstructed to front grill. |
|
| See INSTALLATION |
| Temperature not set | Turn control knob |
| cold enough | CLOCKWISE to set |
|
| temperature colder. |
|
| Allow 24 hours for |
|
| temperature to stabilize |
27
