5.4. Driver Config
This page allows setting, changing and removing the password of the Administration Center.
When you click on "Reset" button, the following dialog appears.
If a password has been set during installation, it can be changed here. To do so, retype the old
password and type the new password twice to confirm. Click on OK to store the changes. If the
new passwords do not match or the old password is wrong, an error message appears.
To clear the password, the "new password" fields must be left empty.
To set a password, and no previous password has been set yet, the "old password" field must be
left empty.
Prima 3 Driver Manual
56