Ultra electronic XID590ie, XID580ie, XID570ie manual Exchange the card sides

Prima 3 Driver Manual

Step 6: Exchange the card sides

As seen in the last step, for non-blank cards, the position of the magnetic stripe or contact chip or both must be adjusted to fit the layout. While the Rotation-button rotated the card on both sides, the Exchange-buttonallows to swap the front and back sides if the magnetic stripe or the chip are shown at the wrong side of the layout.

Magnetic stripe:

The stripe can either be on the front or the back side of the layout.

Contact chip:

The chip can either be on the front or the back side of the layout.

The following illustrations show some examples of magnetic stripe and chip cards and a combination of both types and the effect of the rotate-button.

Note: The same applies for one-sided cards.

Magnetic stripe Contact chip

++

++

Magnetic stripe + contact chip

+

+

81