Uniden Answering Machine manual Low battery alert, Cleaning the battery charging contacts

Models: Answering Machine

1 52
Download 52 pages 55.17 Kb
Page 11
Image 11

Low battery alert

When the battery pack is very low and needs to be charged,

the phone is programmed to eliminate functions in order to save power. If the phone is not in use, “Low Battery“ appears on the LCD and none of the keys will operate.

If the phone is in use, “Low Battery“ flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to either charging cradle for charging.

The last number dialed in the redial memory and the numbers stored in the memory locations are retained for up to 30 minutes while you replace the battery pack.

Cleaning the battery charging contacts

To maintain a good charge, it is important to clean the charging contacts on the handsets, base unit and charging cradle once a month. Using water only, dampen a cloth to clean the charging contacts. Then make sure to go back over the charging contacts with a dry cloth before returning the handset to the base to charge.

Caution: Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.

www.uniden.com

Low Battery

• Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance, be sure to return the handset to either charging cradle after a telephone call.

Talk Mode -

The handset is off either charging cradle and the talk/flash key has been pressed enabling a dial tone.

Standby Mode - The handset is not in use, off either charging cradle, and the talk/flash key has not been pressed. A dial tone is not present.

G E T T I N G S TA R T E D [ 11 ]

GETTING STARTED

Page 11
Image 11
Uniden Answering Machine manual Low battery alert, Cleaning the battery charging contacts