
1) When the phone is in the standby mode, press and hold the cid/menu key. The following screen appears.
2) Press the vol/ring/ key to select “Dial”.
3) Press the select/channel key to toggle between “Tone” and “Pulse”.
4)Press the end key and return the handset to the base unit to complete the setting. The handset returns to standby mode.
Setting the language
1) When the phone is in standby mode, press and hold the cid/menu key. The following screen appears.
2) Press the vol/ring/ key to select “Language”.
3) Press the select/channel key to toggle between “Eng”, “Fr.” and “Esp”.
4)Press the end key or return the handset to the base unit or charging cradle to complete the setting. The handset returns to standby mode.
•Dialing mode can only be changed from handset 1. To confirm which handset is HS1, look at the display indicating “HS1” or
“HS2”.
•If you are not sure of your dialing system, set for tone dialing. Make a trial call. If the call connects, leave the setting as is, otherwise set for pulse dialing.
•If your phone system requires pulse dialing and you need to send the DTMF tones for certain situations during a call, you may "switch over" to tone dialing. (Refer to "Tone Dialing Switch over" on page 22.)
GETTING STARTED
www.uniden.com | G E T T I N G S TA R T E D [ 19 ] |