Uniden Answering Machine manual When to Re-register Handsets, Call Transfer Feature

Models: Answering Machine

1 52
Download 52 pages 55.17 Kb
Page 14
Image 14
Transfer Call
Hold Transfer Call

If the second handset’s battery becomes very low, the handset must be recharged for 15-20 hours and re-registered to the base unit.

Make sure to return the handsets to the charging cradles after each phone call.

Call transfer allows you to transfer outside calls from handset to handset, only one handset at a time can talk with an outside caller.

If you transfer the call and it is not picked up after 5 minutes, the call will

be disconnected.

When to Re-register Handsets

1)You’ll need to re-register the second handset (follow steps on page 13) each time the digital security code is changed. Refer to page 41 for details regarding the Digital Security Code.

2)When there is a power failure for more than one hour:

If power failure occurs (e.g. due to electrical storm or if the unit is unplugged during a move), both handsets will need to be re-registered. To re-register, follow the same registration process on page 13.

Call Transfer Feature

Conveniently, your cordless phone allows you to transfer outside calls from handset to handset, simply by pressing the delete/transfer key. Not to worry, conversations will not be interrupted; only one handset at a time can talk with an outside caller.

The second handset cannot go off hook to listen to conversations or make an outgoing call while the other handset is in use.

To transfer a call (to the second handset)

1) Press the delete/transfer key during a call. The call will automatically be placed on hold and the transfer tone sounds.

2)When the other handset receives the call, the transfer tone

stops. To cancel the transfer, press delete/transfer or talk/flash on the handset.

To receive a transfer call (from the second handset)

Pick up the handset (when AutoTalk is set to On), or pick up the handset and press the talk/flash key to answer the transferred call. Additionally, you can answer the transferred call by pressing

any number key, the */tone/ , or #/ key (when AutoTalk is set to On).

[ 14 ] G E T T I N G S TA R T E D

www.uniden.com

Page 14
Image 14
Uniden Answering Machine When to Re-register Handsets, Call Transfer Feature, To transfer a call to the second handset