Before Using, Register Second Handset to the Base Unit
When the dual handsets are removed from the packaging, the handset that is placed in the base unit first (to charge battery for
You will also need to register the second handset by placing it in the base cradle. The second handset WILL NOT operate properly until the registration has been completed. Once the handset is registered, it is ready for use.
Follow these simple steps to register:
1)First, install the battery packs in both handsets. Place either handset in the base, then place the second handset in the charging cradle. Charge both handsets for 15- 20 hours.
2)After fully charging both handsets, remove the handset in the charging cradle, and place it in the base. The charge/in use LED light on the base will begin to flash, indicating that the registration is taking place between the second handset and the base.
3)Wait for at least 5 seconds before removing the handset from the base.
Congratulations, the registration has been completed, and your dual handset cordless phone is ready for use!
•When you charge the handset, Caller ID summary screen and the name of the handset, HS1 appears. If HS2 appears, you are charging the handset No. 2.
HS1
New :01
Total:02
•The charging cradle can be used to charge either handset.
GETTING STARTED
www.uniden.com | G E T T I N G S TA R T E D [ 13 ] |
