The Bank label/icon for the scanned frequency flashes while that bank is scanned. When an active frequency is found, the scanner stops on that frequency and the Bank label/icon remains steady. When transmission ends, the scanner pauses 2 seconds for a new transmission. If no new transmission is found, scanning resumes.
Press UP to manually continue scanning. Multiple active banks are scanned in order.
Note: Before you can scan the Private bank, you must program frequencies into the channels.. Refer to “Private Bank” on page 50..
SEARCH
Search lets you search through
Press BAND key to select 1 of 13 separate frequency bands to search. Press the SEARCH key to begin searching. The scanner displays frequencies as it searches and stops on active frequencies until that transmission ends. If no transmission resumes after 2 seconds, the search automatically continues through the rest of the band. Use the UP or DOWN key to change the direction of the search or press the BAND key again to change bands.
30
