Uniden owner manual Keep scanning after If the BC355C stops on an active

If You Want to do This -	Here’s How -
Resume scanning	•	Any bank key - If you press a different
(Cont.)		bank key, you will start scanning in
		that new bank and the bank label will
		resume flashing.
	•	L/O key - Press this key to lock out
		this frequency and step to the next
		frequency
Keep scanning after the	If the BC355C stops on an active
BC355C has stopped on	channel that you do not want to
an active channel	monitor but you do not want to lock
	out, press the bank key or the UP key.
	You will scan to the next frequency.
Select a different bank	Use one of the following two
to scan	methods:
	.	Use the UP key to move through
		frequencies and banks.
	.	Deactivate the bank(s) you do
		not want to listen to, leaving only
		the desired band active.

34