Uniden owner manual Permanently Mounting the BC355C Unit

Models: BC355C

1 68
Download 68 pages 14.61 Kb
Page 18
Image 18

. Plug one end of the Vehicle Power Adapter into the vehicle’s accessory power jack and the other end into the DC 13.8V jack on the back of the scanner.

. Connect the mobile antenna plug into the ANT connector on the rear panel. For more information on antenna installation, please refer to the instruction guide that came with your mobile antenna.

Permanent Mobile Installation

Permanently installing the BC355C scanner into a vehicle involves two main steps - physically installing the scanner and physically connecting the power supply. It does not matter which is installed first; perform these procedures in an order that is most appropriate for your vehicle’s configuration.

Permanently Mounting the BC355C Unit

. Select a location in your vehicle to mount the BC355C unit. Avoid any locations that could interfere with your driving. In a passenger car, the ideal location is underneath the dashboard on the passenger side.

. Use the mounting bracket (optional) as a template for marking the location of the mounting screws.

18

Page 18
Image 18
Uniden owner manual Permanently Mounting the BC355C Unit