Uniden BC9000XLT Bank a P ch, Programming With the Rotary Tuner, Bank B 000.0000MHz Bank C

If an error is made during programming, or if the frequency is out of range, this screen appears. Enter a valid channel or frequency number.

If the frequency is stored in another channel, the display will indicate the original channel for that frequency.

Bank A P ch 1

OUT OF BAND

Bank A	ch 1
DUPLICATE	CH 230

To program more channels, repeat steps 3 and 4.

Press eto store the same frequency into the selected channel. Or, select another channel.

Or, press ?twice to clear.

Programming With the Rotary Tuner

Use these controls:

MEM		SHIFT
COUNT	AUX	STATUS
PROG	SEND	ALPHA
	HOLD		TWIN TURBO		BRI	DIM	OFF
		SCAN		MANUAL	1	2	3
SRC	AUTO				AM	NFM	WFM
					4	5	6
		PRI TURBO	CTCSS	DATA
					5KHz	12.5 KHz	25KHz
	LIMIT	L/O	DELAY	ATT	7	8	9
LINE	EXT SP				CLR	50KHz	HI-CUT

0 E

BC9000XLT

A B C D E

F G H I J

FREQCHAN

SQUELCH

LOCKVOLUME

OFF

Scan, Numeric Keys, and Rotary Tuning Controls

1.Press mto enter the Manual Mode.

OR

Press LOCK, then turn the Rotary Tuner.

Note: Make sure the LOCK LED is out.

2.Press CHAN, then turn the knob.

Example: Channel 52 Turn right to step up through channels, left to step down through channels.

Bank B ch 49

L/O 000.0000MHz

Bank C ch 52

L/O 000.0000MHz

Note: The channel selection flashes on the display, indicating that the frequency displayed is not programmed in that channel.

13