Uniden BC9000XLT specifications Troubleshooting, Scanner won’t work

Troubleshooting

If your BC9000XLT is not performing properly, try the steps listed below.

PROBLEM	SUGGESTION
Scanner won’t work.	Check the connections at both ends of
	the AC Adapter.
	Turn on the wall switch of your room.
	You could be using an outlet controlled
	by the wall switch. Move the AC
	Adapter to another wall outlet.
	Make sure the power switch is turned on.
Poor reception.	Check the antenna and its connection.
	You may be in a fringe area. This may
	require an optional multi-band antenna.
	Check with your dealer or local
	electronics store.
Scan won’t stop.	Adjust the Squelch Control.
	Check the antenna connection.
	It is possible that none of the
	programmed channels are active at the
	time. Try the band search.
Scan won’t start.	Press the bank key again.
	Make sure there are some
	programmed channels.
	Adjust the Squelch Control.
Search won’t start.	Adjust the Squelch Control.
Scanner won’t allow any program	Check the Enter Lock feature.
inputs
Can’t program channel with alpha	Alpha character programming is
character	available on channels 1 - 250. Make
	sure the channel is within that range.

If you still cannot get satisfactory results and want additional information, or to return the unit for service, please call Uniden Customer Service at 800-297-1023.

51