Uniden BC9000XLT Using Priority Scan, Scan, Mode, and Numeric Keys, and Rotary Tuning Controls

Using Priority Scan

You can program one Priority Channel in each of the first 10 banks. During Priority Scanning, your scanner checks these special channels every two seconds, whether or not the scanner has located an active channel.

Use these keys:

MEM		SHIFT
COUNT	AUX	STATUS
PROG	SEND	ALPHA
	HOLD		TWIN TURBO		BRI	DIM	OFF
		SCAN		MANUAL	1	2	3
SRC	AUTO				AM	NFM	WFM
					4	5	6
		PRI TURBO	CTCSS	DATA
					5KHz	12.5 KHz	25KHz
	LIMIT	L/O	DELAY	ATT	7	8	9
LINE	EXT SP				CLR	50KHz	HI-CUT

0 E

BC9000XLT

A B C D E

F G H I J

FREQCHAN

SQUELCH

LOCKVOLUME

OFF

Scan, Mode, and Numeric Keys, and Rotary Tuning Controls.

Press p.

You can turn Priority Scan ON in Scan Mode or Manual Mode.

P	Bank	ABCDEF		I
	Sca n	1	5 7	0

Moving the Priority Channel

The scanner is pre-programmed with the first channel of each bank as a priority channel. However, you can change the priority channel to be any other channel within the bank.

1.Press m.

2.Select the new priority channel. Example: Press 9.

OR

Use the Rotary Tuner.

3.Press and hold pfor two seconds. You hear a double beep.

PBank A ch 9 325.0500MHz

Bank A P ch 9 325.0500MHz

28