Uniden BC9000XLT specifications Record ch 1 482.7625MHz, Using Auto Recording

Using Auto Recording

The Auto Recording feature allows you to automatically tape record activity from any channel of your scanner. When scanning stops on the assigned channel, the recorder records the broadcast.

Before using the Auto Tape feature, connect the scanner to a tape recorder. (See page 6.)

Use these keys:

MEM		SHIFT
COUNT	AUX	STATUS
PROG	SEND	ALPHA
	HOLD		TWIN TURBO		BRI	DIM	OFF
		SCAN		MANUAL	1	2	3
SRC	AUTO				AM	NFM	WFM
		PRI TURBO	CTCSS	DATA	4	5	6
					5KHz	12.5 KHz	25KHz
	LIMIT	L/O	DELAY	ATT	7	8	9
LINE	EXT SP				CLR	50KHz	HI-CUT

0 E

BC9000XLT

A B C D E

F G H I J

FREQCHAN

SQUELCH

LOCKVOLUME

OFF

Status, Scan, and Numeric Keys,

Rotary Tuning Controls, Line jack

1. Press s.

Bank A P ch 1 482.7625MHz

2.When the scanner stops on a channel you want to record, press m, then press x.

Record ch 1 482.7625MHz

Note: You can also select the channel manually.

To select other channels for recording, repeat steps 1 and 2.

To record transmissions, you need a tape recorder with Remote and Microphone inputs.

1.Connect the REMOTE jack of your tape recorder to the AUX jack on the rear of the BC9000XLT. This can be used to start and stop your recorder.

2.Put a tape in your recorder, and put it in the Record mode.

3.Press s.

41