Manuals / Uniden / Kitchen Appliance / Cooktop

Uniden BC 278CLT manual Restore All Locked Out Channels, Delay, Press MANUAL

Models: BC 278CLT

1 44

Download 44 pages 28.43 Kb

Page 22

Restore All Locked Out Channels

2. Press LOCKOUT again to unlock the displayed channel. L/O no longer appears in the display.

Restore All Locked Out Channels

To unlock all channels, you must be in the Manual Mode.

1. Press MANUAL.

2. Press and hold LOCKOUT to unlock all channels. The L/O indicator goes out on any channel previously locked out.

Delay

In the Scan mode, the delay feature causes the scanner to remain on the frequency 2 seconds after the end of a transmission to wait for a possible reply. A Delay function can be set for each programmed channel so that when searching stops on a channel there is a brief pause before the scanning resumes. The delay can be set when your scanner stops on a channel while scanning or when a channel is selected by Manual mode.

19

Image 22

Uniden BC 278CLT manual Restore All Locked Out Channels, Delay, Press MANUAL

Contents

MEMORY BACKUP ALARM CLOCK AM/FM RADIO SERVICE SCANCHANNEL LOCKOUT PRIORITY CHANNEL SCAN DELAY BC 278CLTPrecautions About the Unit Troubleshooting TABLE OF CONTENTSSet-Up Using the Scanner Additional Features SpecificationsINTRODUCTION About ScanningTaking Proper Care of Your Scanner UnpackingInstalling the BC278CLT GETTING STARTEDControls and Functions VOLUMEOPERATION SQUELCH21 SCAN Key ALARM AM,FM Scanning OverviewChannel CLOCK SET-UP Initial Clock Set-upUSING THE SCANNER Set the Squelch4.To set the SQUELCH control to AUTO turn fully counterclockwise until control clicks into place. Or, manually set squelch as follows Programming Tips for scanner Programming Scanner Frequencies Deleting a Scanner Frequency Bank Scanning About Memory Back-upScanning Mode The following screen appearsManual Mode Direct Channel Access Priority Scanning1. Press MANUAL to exit the Scan Mode To Set the Priority ChannelExample To set Channel 5 as the priority channel 3. Press and hold PRIORITYChannel Lockout Delay Restore All Locked Out Channels1. Press MANUAL 2.Select the channel you want using your keypad To Set Delay in Scan ModeTo Set Delay in Manual Mode 1. Press SCANSearching stop the search Search Hold mode1. Press HOLD or LIMIT at any time to Storing Search FrequenciesService Scan Weather ChannelTo exit Weather Channel Scan mode, press SCANNER, RADIO AM/FM or OFFWeather Alert with S.A.M.E To cancel the siren, press WX/ALERTAbout S.A.M.E Programming FIPS CodeLCD Backlight ADDITIONAL FEATURESProgramming Radio AM/FM Frequencies 4. Press E to complete the entry. The channel digits stop flashing Direct Channel Access for Radio Stations Deleting a Stored Radio FrequencyReset the Clock Time Set the Alarm Time Set Alarm to Tone Mode Turn the Alarm Off Set Alarm to Radio Mode Turn the Alarm OffABOUT THE UNIT Helpful HintsProblem TROUBLESHOOTINGSolution Solution At Uniden, we’ll take care of youProblem Adjust squelch to the threshold PageAbove bands in 5 kHz steps TECHNICAL SPECIFICATIONSAbove bands in 5 kHz steps Above bands in 12.5 kHz stepsPage ONE-YEAREXTENDED WARRANTY THANK YOU 1999 Uniden America Corporation UBZZ01304ZZ