Manuals / Uniden / Kitchen Appliance / Cooktop

Uniden BC 278CLT manual Additional Features, LCD Backlight, Programming Radio AM/FM Frequencies

Models: BC 278CLT

1 44

Download 44 pages 28.43 Kb

Page 30

ADDITIONAL FEATURES

ADDITIONAL FEATURES

LCD Backlight

The LCD backlight comes on when the power is applied. In Scan mode, Manual mode, and Weather mode, the backlight stays on bright continuously. In the other modes, the backlight stays bright for ten seconds and then switches to dim. Press any key and the display switches back to bright for ten seconds.

Programming Radio AM/FM Frequencies

Before you can use the Radio mode, you must program the channels with your favorite radio stations. You can program up to 20 stations (10 AM/10 FM). Follow these steps:

Example: Program FM Channel 9 with 92.5000 MHz.

1. Press RADIO AM/FM to enter into the Radio mode. (The initial default setting is FM Channel 1 with 000.0000 MHz for the frequency). The RADIO and FM icons appear in the display.

2. To select the channel (9), press 9 on the numeric keypad.

Press 0 to select channel 10.

27

Image 30

Uniden BC 278CLT manual Additional Features, LCD Backlight, Programming Radio AM/FM Frequencies

Contents

MEMORY BACKUP ALARM CLOCK AM/FM RADIO SERVICE SCANCHANNEL LOCKOUT PRIORITY CHANNEL SCAN DELAY BC 278CLTPrecautions About the Unit Troubleshooting TABLE OF CONTENTSSet-Up Using the Scanner Additional Features SpecificationsINTRODUCTION About ScanningTaking Proper Care of Your Scanner UnpackingInstalling the BC278CLT GETTING STARTEDControls and Functions VOLUMEOPERATION SQUELCH21 SCAN Key ALARM Scanning Overview AM,FMChannel CLOCK SET-UP Initial Clock Set-upUSING THE SCANNER Set the Squelch4.To set the SQUELCH control to AUTO turn fully counterclockwise until control clicks into place. Or, manually set squelch as follows Programming Tips for scanner Programming Scanner Frequencies Deleting a Scanner Frequency Bank Scanning About Memory Back-upScanning Mode The following screen appearsManual Mode Direct Channel Access Priority Scanning1. Press MANUAL to exit the Scan Mode To Set the Priority ChannelExample To set Channel 5 as the priority channel 3. Press and hold PRIORITYChannel Lockout Restore All Locked Out Channels Delay1. Press MANUAL 2.Select the channel you want using your keypad To Set Delay in Scan ModeTo Set Delay in Manual Mode 1. Press SCANSearching stop the search Search Hold mode1. Press HOLD or LIMIT at any time to Storing Search FrequenciesService Scan Weather ChannelTo exit Weather Channel Scan mode, press SCANNER, RADIO AM/FM or OFFWeather Alert with S.A.M.E To cancel the siren, press WX/ALERTAbout S.A.M.E Programming FIPS CodeADDITIONAL FEATURES LCD BacklightProgramming Radio AM/FM Frequencies 4. Press E to complete the entry. The channel digits stop flashing Direct Channel Access for Radio Stations Deleting a Stored Radio FrequencyReset the Clock Time Set the Alarm Time Set Alarm to Tone Mode Turn the Alarm Off Set Alarm to Radio Mode Turn the Alarm OffABOUT THE UNIT Helpful HintsTROUBLESHOOTING ProblemSolution Solution At Uniden, we’ll take care of youProblem Adjust squelch to the threshold PageAbove bands in 5 kHz steps TECHNICAL SPECIFICATIONSAbove bands in 5 kHz steps Above bands in 12.5 kHz stepsPage ONE-YEAREXTENDED WARRANTY THANK YOU 1999 Uniden America Corporation UBZZ01304ZZ