Programming Scanner Frequencies
Before you can use your BC278CLT scanner, you must program the channels (except weather and service frequencies). Follow these steps:
Example: Program 420.150 MHz into Channel 12.
1. Press MANUAL to stop scanning.
2. To select the channel (12), press 1, then 2 on the numeric keypad. Then press MANUAL again.
OR
Press ▼/▲ until channel 12 appears in the display.
3. Type in the frequency numbers, including the decimal point, using the numeric keypad: 420.0150. Channel digits flash as you make entry.
If you enter the number which cannot receive the signals, the scanner automatically set the nearest effective frequency number.
12
