Manuals / Uniden / Kitchen Appliance / Cooktop

Uniden BC 278CLT manual Searching

Models: BC 278CLT

1 44

Download 44 pages 28.43 Kb

Page 24

Searching

Searching

The BC278CLT can search a specific frequency range to find frequencies. To use the search function, set a search range first.

To set the frequency range

You can set the frequency range in Manual mode, Service Scan mode, WX mode, and Search Mode. When you wish to set the frequency range for the first time, you cannot enter Search mode.

1.Enter the lowest frequency by using the number keypad 0-9 then press ▼LIMIT.

2.Enter the highest frequency range by using the number keypad 0-9 then press ▼LIMIT.

To search

If you enter Search mode before setting the frequency range, Error appears on the display.

To avoid this, you have to set the frequency range before entering Search mode for the first time.

1. Press SEARCH to start searching

.

2.Searching stop when a transmission is found.

3.Press SEARCH again to continue searching.

4. To exit search mode, press MANUAL

.

21

Image 24

Uniden BC 278CLT manual Searching

Contents

ALARM CLOCK AM/FM RADIO SERVICE SCAN CHANNEL LOCKOUT PRIORITY CHANNEL SCAN DELAYMEMORY BACKUP BC 278CLTPrecautions TABLE OF CONTENTS Set-Up Using the Scanner Additional FeaturesAbout the Unit Troubleshooting SpecificationsINTRODUCTION About ScanningTaking Proper Care of Your Scanner UnpackingInstalling the BC278CLT GETTING STARTEDVOLUME OPERATIONControls and Functions SQUELCH21 SCAN Key ALARM Scanning Overview AM,FMChannel CLOCK SET-UP Initial Clock Set-upUSING THE SCANNER Set the Squelch4.To set the SQUELCH control to AUTO turn fully counterclockwise until control clicks into place. Or, manually set squelch as follows Programming Tips for scanner Programming Scanner Frequencies Deleting a Scanner Frequency About Memory Back-up Scanning ModeBank Scanning The following screen appearsManual Mode Direct Channel Access Priority ScanningTo Set the Priority Channel Example To set Channel 5 as the priority channel1. Press MANUAL to exit the Scan Mode 3. Press and hold PRIORITYChannel Lockout Restore All Locked Out Channels Delay1. Press MANUAL To Set Delay in Scan Mode To Set Delay in Manual Mode2.Select the channel you want using your keypad 1. Press SCANSearching Search Hold mode 1. Press HOLD or LIMIT at any time tostop the search Storing Search FrequenciesService Scan Weather ChannelTo exit Weather Channel Scan mode, press SCANNER, RADIO AM/FM or OFFWeather Alert with S.A.M.E To cancel the siren, press WX/ALERTAbout S.A.M.E Programming FIPS CodeADDITIONAL FEATURES LCD BacklightProgramming Radio AM/FM Frequencies 4. Press E to complete the entry. The channel digits stop flashing Direct Channel Access for Radio Stations Deleting a Stored Radio FrequencyReset the Clock Time Set the Alarm Time Set Alarm to Tone Mode Turn the Alarm Off Set Alarm to Radio Mode Turn the Alarm OffABOUT THE UNIT Helpful HintsTROUBLESHOOTING ProblemSolution At Uniden, we’ll take care of you ProblemSolution Adjust squelch to the threshold PageTECHNICAL SPECIFICATIONS Above bands in 5 kHz stepsAbove bands in 5 kHz steps Above bands in 12.5 kHz stepsPage ONE-YEAREXTENDED WARRANTY THANK YOU 1999 Uniden America Corporation UBZZ01304ZZ