Manuals / Uniden / Kitchen Appliance / Cooktop

Uniden BC 278CLT Operation, Controls and Functions, Volume, Squelch, OFF Key, 12 15 20 21, E Key

Models: BC 278CLT

1 44

Download 44 pages 28.43 Kb

Page 7

OPERATION

OPERATION

Controls and Functions

7	8	9	10	11
	12 BAND		800MHz

6

5

W E A T H E R A L E R T

12 15 20 21 13 16 18 22 19 17 14

1.LCD Display Displays time, channel, frequency, and functions. (Page 6)

2.Numeric Keys Press to program a frequency into each channel for scanning. Also, press for time entries and direct channel access with MANUAL key. And press for channel presets in Radio mode.

3.Decimal Key Press to enter the decimal point in the frequency. Also, use for

clearing mistakes during entries by pressing twice.

4.	E Key	Enters the frequency or time setting into memory.
5.	VOLUME	Turn clockwise to increase the volume. Turn counterclockwise to
		decrease the volume.
6.	SQUELCH	Adjusts the squelch threshold, or use AUTO for the factory setting.
7.	OFF Key	Turns scanner and radio off and Clock mode on.

8.SCANNER Key Selects the Scanner mode .

9.RADIO AM/FM Key Selects the Radio mode. Also selects AM/FM in Radio mode.

4

Image 7

Uniden BC 278CLT manual Operation, Controls and Functions, Volume, Squelch, OFF Key, 12 15 20 21, E Key

Contents

Reference Guide ALARM CLOCK AM/FM RADIO SERVICE SCANMEMORY BACKUP BC 278CLTPrecautions Specifications TABLE OF CONTENTSSet-Up Using the Scanner Additional Features About the Unit TroubleshootingAbout Scanning INTRODUCTIONUnpacking Taking Proper Care of Your ScannerGETTING STARTED Installing the BC278CLTSQUELCH VOLUMEOPERATION Controls and Functions21 SCAN Key ALARM AM,FM Scanning OverviewChannel Initial Clock Set-up CLOCK SET-UPSet the Squelch USING THE SCANNER4.To set the SQUELCH control to AUTO turn fully counterclockwise until control clicks into place. Or, manually set squelch as follows Programming Tips for scanner Programming Scanner Frequencies Deleting a Scanner Frequency The following screen appears About Memory Back-upScanning Mode Bank ScanningManual Mode Priority Scanning Direct Channel Access3. Press and hold PRIORITY To Set the Priority ChannelExample To set Channel 5 as the priority channel 1. Press MANUAL to exit the Scan ModeChannel Lockout Delay Restore All Locked Out Channels1. Press MANUAL To Set Delay in Manual Mode 2.Select the channel you want using your keypadTo Set Delay in Scan Mode 1. Press SCANSearching Storing Search Frequencies Search Hold mode1. Press HOLD or LIMIT at any time to stop the searchWeather Channel Service ScanSCANNER, RADIO AM/FM or OFF To exit Weather Channel Scan mode, pressTo cancel the siren, press WX/ALERT Weather Alert with S.A.M.EProgramming FIPS Code About S.A.M.ELCD Backlight ADDITIONAL FEATURESProgramming Radio AM/FM Frequencies 4. Press E to complete the entry. The channel digits stop flashing Deleting a Stored Radio Frequency Direct Channel Access for Radio StationsReset the Clock Time Set the Alarm Time Set Alarm to Tone Mode Turn the Alarm Off Turn the Alarm Off Set Alarm to Radio ModeHelpful Hints ABOUT THE UNITProblem TROUBLESHOOTINGSolution Adjust squelch to the threshold Page At Uniden, we’ll take care of youProblem SolutionAbove bands in 12.5 kHz steps TECHNICAL SPECIFICATIONSAbove bands in 5 kHz steps Above bands in 5 kHz stepsPage ONE-YEAREXTENDED WARRANTY 1999 Uniden America Corporation UBZZ01304ZZ THANK YOU