To... | From the base | From a cordless handset | |
hear the caller leaving | Just listen to the caller over | Press Mute/messages. | |
a message | the speaker. |
| |
answer the call | Pick up the corded handset. | Press Talk. | |
mute the call screen | Press Clear/mute. | Press Flash/exit or return | |
without answering | the handset to the cradle. | ||
| |||
|
|
|
If you mute the call screen, the system continues taking the message: it just stops playing through the speaker.
Only one cordless handset at a time can screen calls. If another handset is screening the call, the handset beeps and returns to standby.
Using the System While You're Away from Home
You can also operate your answering system from any
Programming a security code
) With the phone in standby, open the menu from any station.
) Select Ans. Setup, then select Security Code.
) Use the number keypad to enter a
Remember to make a note of your new security code!
Dialing in to your system
) Call your telephone number and wait for the system to answer. (If your answering system is off, it will answer after about ten rings and sound a series of beeps instead of your greeting.)
) During the greeting (or beeps), press 0 and immediately enter your security code. (You have 3 tries to enter you security code: if you enter it wrong 3 times, the system hangs up and returns to standby.)
) The system announces the current time, the number of messages stored in memory, and a help prompt. Then it starts beeping intermittently to let you know it's waiting for your command.
) When you hear the intermittent beeping, enter a command from the
chart to the right. |
|
|
|
|
|
Repeat message |
| Stop playback | |||
If you don't press |
| ||||
|
|
|
|
| |
Play message |
| Turn the system on | |||
any keys for 15 |
| ||||
|
|
|
|
| |
Skip message |
| Turn the system off | |||
seconds, the phone |
| ||||
will hang up and | Delete message |
| Hear help prompts | ||
return to standby. |
|
|
|
|
|
|
|
|
|
|
25
