For wall mount use only
) On the front of the base, pull the clip (that holds the corded handset in place) out of its slot.
) Rotate the clip 180 degrees.
) Flip it from front to back and slide it back into the slot.
Connect the power and telephone cords
) Connect the base AC adapter to the AC IN 7.8V jack and the telephone cord to the TEL LINE jack. Route the cords as shown below:
For desktop use | For wall mount use |
) Plug the AC adapter into a standard 120 V AC power outlet, and
connect the telephone cord to a standard telephone wall jack.
Place the phone on the wall
Place the mounting slots over the pins on the wall plate, and slide the base down to lock it into place.
