Uniden CEZAI998 manual Adjusting the Base Display LCD Contrast, Setting the Area Code

6)Press [select/+] or [select/-]to choose AM or PM, and then press [menu/set]. You will hear a confirmation tone.

Note: Use [ ] (delete) to edit the hour and minute.

Adjusting the Base Display (LCD Contrast)

You can adjust the contrast or brightness of the text that appears on your base display. Choose one of ten levels for optimum viewing.

1) Press [menu/set] on the base.

2) Press [select/-]to move the pointer to select LCD CONTRAST and then press [menu/set].

3)Press [select/+] or [select/-]to adjust the contrast of the base display.

4)Press [menu/set]. You will hear a confirmation tone.

Setting the Area Code

If in your local calling area you can make a local call by dialing only 7 digits (instead of 10), you can program your local area code in your phone. Calls that come from within your area code will show only the 7-digit phone number; calls from outside your area code will show all 10 digits. To enter an area code, follow the steps below:

1) Press [menu/set] on the base.

2) Press [select/-]to move the pointer to select AREA CODE, and then press [menu/set].

3) Press the number keypad [0-9]to enter a 3-digit area code.

w w w . u n i d e n . c o m BASE SETUP [20]