may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone.
FCC PART 15.105(b): Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
xx Reorient or relocate the receiving antenna. xx Increase the separation between the
equipment and receiver.
xx Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
xx Consult the dealer or an experienced radio/ TV technician for help.
RF Exposure Information
This product complies with FCC radiation exposure limits under the following conditions:
xx The base must be placed to allow a minimum of 20 cm (8 inches) between the antenna and all persons during normal operation.
xx The base must not be collocated or operated in conjunction with any other antenna or transmitter.
xx The handset is designed for
are included in the package; any additional or optional accessories are not required for compliance with the guidelines.) Third party accessories (unless approved by the manufacturer) should be avoided as these might not comply with FCC RF exposure guidelines.
Disable All Functions Except Charging
D1484 Base
1.Press and hold SKIP and VOL + simultaneously, then plug in the AC adapter.
2.Continue to hold the keys for about 5 seconds. When the message counter turns off, all functions are disabled except for charging.
D1484 Handset
1.Install the battery.
2.When the “Welcome, please wait...” message disappears from the display, press and hold END, MENU, and * simultaneously.
3.After about 5 seconds, a confirmation tone sounds, indication all functions except charging are disabled.
To return to normal operation, cycle the power for the base and remove and reinstall the handset battery.
Industry Canada (I.C.) Notice
Terminal equipment
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation IC before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The REN assigned to each terminal equipment provides an indication of the maximum
English - 17
