Uniden DECT4066, DCX400, DRX402 Using Your Phone, Working with Two Lines, Assigning a primary line

Using Your Phone

Working with Two Lines

When performing common tasks, you can let the station use the primary line, or you can manually choose a particular line for each task. Using the primary line makes common tasks much simpler, but you will need to assign a primary line to each station (see below).

If you want to...	From a handset	From a handset	From the base
		speakerphone	speakerphone

make a call: Dial the number, then

- with the primary line Press TALK/FLASH. Press SPEAKER.

- by choosing a line Press LINE1 or LINE2.*

answer a call

When a call comes in, the soft keys blink to tell you which line is ringing.

- with the primary line	Press TALK/FLASH.						Press SPEAKER.
- by choosing a line	Press the soft key for the line you want to answer.*
hang up	Press END or return the handset to								Press SPEAKER.
	the cradle.
switch between the	Press SPEAKER.								Not available
speaker and earpiece
	Press INTERCOM/HOLD; the soft key blinks to remind
put a call on hold	you the line is on hold. To return to the call, press the
	soft key (		LINE1		or	LINE2		) for the holding line.
switch lines during a	Press the soft key for the other line; the current call
	is automatically put on hold (see above). To return to
call (automatic hold)	the call, press the soft key for the holding line.
mute the microphone	Press	MUTE		.					Press MUTE/EXIT.
during a call	Press again to turn the microphone back on.
mute the ringer for	While the phone is ringing,
this call only	press END.								press MUTE/EXIT.

* On the handset, press SPEAKER to switch to the speakerphone.

Assigning a primary line

You can assign a primary line to each station; the station connects to its primary line whenever it goes off hook (that is, when you press TALK/FLASH or SPEAKER). Whenever you want, you can bypass the

20