Manuals / Uniden / Communications / Cordless Telephone

Uniden DCX400, DRX402, DECT4066-3, DECT4066-5, DECT4066-2 Base Icon Handset Icon What it means

Models: DECT4066-4 DCX400 DECT4066-6 DECT4066-2 DRX402 DECT4066 DECT4066-5 DECT4066-3

1 48

Download 48 pages 26.35 Kb

Page 14

The table below shows the possible icons and what they mean. Since the icons appear based on what you're doing with the phone, you won't ever see all of these icons at the same time.

Base Icon Handset Icon What it means

	or	The accompanying information (in use, on
	or	hold, etc.) applies to line 1.
		hold, etc.) applies to line 1.
	or	The accompanying information (in use, on
	or	hold, etc.) applies to line 2.
		hold, etc.) applies to line 2.
		The ringer is turned off for 1) line 1 only, 2)
		line 2 only, or 3) both. This station will not ring
		when a call comes in on the indicated lines.
		You have a voice message waiting (see "Using
		a Voice Mail Service" on page 34).
		Privacy Mode is on: no other station can join
		your call.

NA

The speakerphone is on.

The microphone is muted, and the caller can't

hear you.

NA

The alarm is set (see "Using the Alarm

Feature" on page 32).

NA

T-coil mode is on (see "Do you use a T-coil

hearing aid?" on page 38).

NA

The battery is 1) fully charged, 2) half

charged, 3) getting low, or 4) empty.

NA

The signal from the base is 1) very weak, 2)

low, 3) strong, or 4) very strong.

12

Image 14

Contents

You might also ﬁnd DECT4066 Series Users GuideWhats in the box? Phone Number Important Safety Instructions Whats in the manual? Attach the stand Installing Your PhoneSet Up the Base Telephone cord Connect the power and telephone cordsConnect Here first Place the phone on the wall Setup the HandsetsInstall the battery Charge the battery Try Unavailable Test the ConnectionTest Line Check or Attaching the Belt Clip Changing from Tone to Pulse Dialing Display Getting to Know Your PhoneParts of the Base Base keys and how they work Parts of the Handset Handset keys and how they work On the handset Reading the DisplaysOn the base Base Icon Handset Icon What it means Soft keys in the main menu Using the Soft KeysSoft keys with the phone in standby Common soft key descriptions What it does Entering Text on Your Phone Using the Menus Handset Setup Menu option Use it to Menu option Use it to Display. Enter any name up to 10 characters Special Feature Menus Set Line Assigning a primary line Using Your PhoneWorking with Two Lines Conferencing two lines together Change When On the base On a handset Changing the VolumeUsing the Caller ID and Redial Lists High Caller ID and redial menu options Using the listsDialing from the CID or redial list Store into PB Using Seven-Digit Dialing Using Call Waiting Using an Optional Headset Finding a Lost Handset Creating a new entry Using the PhonebookSetting Up Your Phonebook Edit Name Editing an existing entry Phonebook Menu Options Chain Dialing Expanding Your Phone Using Multi-station FeaturesUsing Multi-Station Conference Calling From the base From a handset Using Privacy ModeUsing Call Transfer Using the Intercom Using the Alarm Feature Using Special FeaturesUsing Do Not Disturb Setting an alarm When an alarm rings Tuesday Using a Voice Mail Service Setting Up Your Voice Mail Resetting the voice message indicator Getting your messages Says Unavailable Solving ProblemsIf… Try… Letting calls ring at least twice before answering Weak or Hard To Hear Audio Handset Setup , then select T-coilStatus and keep the battery charged Noise or Static On The Line Here are some hints for when the static is On 1 handset or in 1 location Do you have the base the handset is registered to? Yes Resetting and Registering HandsetsRegistering a handset Does the handset fit in the base cradle? Yes Handling Liquid Damage Handset Base Important Information Terms Used In This Guide Compliance Information FCC Part 15 information FCC Part 15.105b RF exposure information Terminal equipment Radio equipment 574,727 581,598 606,598 650,790 660,269 663,981 671,248