Place the phone on the wall

Place the mounting slots over the pins on the wall plate, and slide the base

down to

lock it

into place.

(To telephone jack

for second line)

Setup the Handset(s)

Install the battery

1. Unpack all handsets, battery packs, and battery covers. If any handset has the battery cover already attached, press in

on the notch and slide the cover down and off.

2. Line up the battery pack connector with the jack inside the handset. (The battery connector will only fit one way.)

3. Push the battery pack connector in until it clicks into place. Tug gently on the wires to make sure the battery pack is securely connected.

4. Place the cover over the battery compartment and slide it up into place.

3

Page 5
Image 5
Uniden DECT4066-4, DCX400, DRX402, DECT4066-3 manual Setup the Handsets, Place the phone on the wall, Install the battery