When you get a Call Waiting call, the phone sounds a tone and displays any CID information received for the waiting call.
To answer a Call Waiting call, press FLASH on the base or TALK/ FLASH on a handset. The phone company automatically puts the current call on hold and switches you to the waiting call.
Use FLASH and TALK/FLASH to switch between the two calls; remember, each time you switch, there is a short pause before you're connected to the other caller.
Finding a Lost Handset
With the phone in standby, press INTERCOM/HOLD on the base. Select the handset you want to find, or select All to page all handsets at the same time. The paged handset(s) will beep for 1 minute or until you press INTERCOM/HOLD again or press TALK/FLASH followed by END on the handset.
Using an Optional Headset
You can use a standard 2.5 mm telephone headset with your cordless handsets. To purchase headsets, contact the Parts Department (see the front cover).
To install a headset, remove the headset jack cover and insert the headset plug into the jack.
(Belt clip hole)
Just make and receive calls as usual, and
use your headset to talk to the caller after the call connects.
When you connect a headset, the handset automatically mutes the earpiece and speaker. To
25
