Uniden DECT4066-6, DCX400, DRX402, DECT4066-3 Test the Connection, Test Line, Unavailable, Check or

Test the Connection

Pick up the handset from the base and press TALK. The phone should pick up line 1 automatically and change the display to show Talk , and you should hear a dial tone.

When you get a dial tone, make a test call; press END to hang up.

If...	Try...
the base display says	checking the connection between the
	base and the phone jack: make sure
Check or you don't hear a
dial tone	the cord is connected to TEL LINE 1/2.
you keep hearing a dial	setting line 1 to pulse dialing (see page
tone	6).
there's a lot of noise or	see page 38 for tips on avoiding
static	interference.
the handset display says	resetting the handset (see page 40). If
	you have accessory handsets, try using
Unavailable
	a different handset for the test call.

Test Line 2

Once you can make calls on line 1, make a test call on the second line. Pick up the handset and press the unmarked key under LINE2.

You should hear a dial tone and the display should show Talk .

SUN 12:00A

Handset #1

.+0' /'07 .+0'

If...		Try...
the display says		checking the connection
	Check or	between the base and the phone
		jack: if you have a separate jack
you don't hear a
		for each line, make sure the
dial tone		cord is connected to TEL LINE 2.
you keep		setting line 2 to pulse dialing
hearing a dial
		(see page 6).
tone

Test any accessory handsets the same way. If you can't get a dial tone or the handset display says Unavailable, try moving the handset closer to the base or resetting it (see page 40).

5